- Details
MMS Electronics Ltd now offers four models of the new EA OLED displays. A small graphic EA OLEDS102-6 (102x64 pixel / 36x25 VA), graphic EA OLEDM128-6 (128x64 / 51x31 VA) and the larger graphic EA OLEDL128-6 (128x64 / 64x37 VA) displays. EA OLEDM204 is an alphanumeric display that can be changed by software to operate as a 4x20, 3x20 or 2x20 (line x character) display. These OLED chip-on-glass COG displays are a slim design and can be plugged into a 0.1” pitch socket or soldered directly into the PCB. No ZIF sockets, fasteners or glueing is required hence saving assembly cost. The displays offer excellent readability, high contrast, wide viewing angle and fast response time over the whole temperature range of -40°C to +80°C. The displays have a convenient SPI and I2C Interface. The displays are manufactured by our trusted supplier Electronic Assembly Gmbh and offer long term product availably.
- Details
The new EA 9781-1USB evaluation board provides rapid development start with the EA OLED displays. The evaluation board powers all the EA OLED display modules including the round EA W128128-X. Download the free PC software StartOLED.exe, install the software and connect the USB cable to the evaluation board and extremely quickly and with minimum expense your graphics and text are shown on the display. The EA 9781-1USB board comes with an arrangement of plug contacts to suit all the OLED display modules. No other hardware components – such as adapters, driver boards, power supplies or the like – are required. This software is available free of charge on the OLED page and can be used even without a test board, which means that text and bitmap graphics for the display modules can be displayed directly. This screen content is loaded onto the test board and displayed. Use of the program is largely self-explanatory and does not require any knowledge of software.
- Details
The new EA 9781-1USB evaluation board provides rapid development start with the EA OLED displays. The evaluation board powers all the EA OLED display modules including the round EA W128128-X. Download the free PC software StartOLED.exe, install the software and connect the USB cable to the evaluation board and extremely quickly and with minimum expense your graphics and text are shown on the display. The EA 9781-1USB board comes with an arrangement of plug contacts to suit all the OLED display modules. No other hardware components – such as adapters, driver boards, power supplies or the like – are required. This software is available free of charge on the OLED page and can be used even without a test board, which means that text and bitmap graphics for the display modules can be displayed directly. This screen content is loaded onto the test board and displayed. Use of the program is largely self-explanatory and does not require any knowledge of software.
- Details
Round, square or very small OLED displays with wide viewing angle and high contrast open up new applications. The OLED displays offer low current, compact module size and extreme wide operating temperature of -40..+80°C. Never before was it possible to use a display at -40°C without adding additional environmental protection and still be able to read the display with quickly changing content. The convenient serial SPI interface and 3.3V supply allows connection to most processors. Applications are hand held instruments and wearables.
EA W064048-XALG, EA W096016-XALB, EA W096016-XALW, EA W096064-XALG
EA W128032-XALG, EA W128064-XALG, EA W128128-XALG, EA W256064-XALG, EA W256064-XGLG
Link to OLED displays and datasheets
